EasyTicket kiosk machine

EasyTicket wristband and card dispensing machine with credit card payment

The kiosk machine is designed to work with the EasyTicket dynamic capacity management sales system.
The kiosk machine allows customers to buy a ticket for a specific facility in a self-service way. They can pay for the ticket by credit card.
The kiosk machine can also be used to redeem tickets previously purchased in the webshop.
The ticket can be in the format of a wristband, a bank card-sized thick paper, or traditional thermal paper.
The ID on the ticket allows the guest to enter the facility independently via a turnstile installed at the entrance.
The ticket supports two types of identification: a barcode printed by the kiosk machine or an RFID chip embedded in the ticket.
The kiosk is a fixed installation, its base must be drilled to the floor.
It requires an IT network endpoint with access to the EasyTicket system.
Can be installed outdoors under a rain screen roof.

Main features

Vandal-proof monitor

  • 19″ screen size, active matrix TFT LCD display technology with LED backlight
  • Resolution: 1280×1024 px
  • Viewing angle 170° horizontal, 160° vertical
  • 1000nit brightness
  • 6mm thick vandal resistant front glass
  • Capacitive touch screen with 10-point touch
  • Built-in cooling control
  • Built-in dimming

High brightness monitors generate more heat, so it is important to ensure the correct temperature inside the kiosk for outdoor applications.
The monitor has a temperature sensor and an automatic cooling function.
Control parameters – on/off temperatures, fan speed, etc.
– can be set individually.

Thanks to the built-in light sensor, the monitor will always operate at the most optimal brightness.
In bright sunlight, the backlight brightness is higher, while in darker ambient light, the backlight brightness is lower.

The 6mm thick glass ballast provides full protection against fist strikes.

Payment by credit card

  • High-resolution bank card terminal with colour display
  • Accepting chip, magnetic and contactless “paypass” cards, including mobile phone payments
  • Stainless steel buttons for entering the PIN code
  • Secure card reading and fast operation
  • Communication authenticated to current security standards
  • Card lock, emergency release
  • Vandalism Commissioner

The vending machine operator must enter into a contract with OTP to start the automated debit card acceptance.

Once a contract is signed, the operator receives a registration code and a special sub-account.

Once you have the registration code, you can activate the card terminal.

Once activated, you can pay by credit card using the built-in terminal.
In case of a successful payment, the amount withdrawn from the card will be credited to the operator’s sub-account.

The credit card terminal maintains a permanent connection with OTP bank.
It requires a reliable internet connection available 0-24 hours.

Admission ticket edition

  • Dispensing wristband or ticket
  • Up to 12 tickets can be dispensed in one transaction
  • Dispensing tickets in the form of wristbands or bank cards
  • Tickets with white or colored graphics
  • Easy to configure, custom text setting for printing
  • The dispensed ticket printed with credit card transaction details
  • Printing a unique barcode
  • Dispensing embedded RFID chip tickets with RFID chip validation

Sold, validated and printed tickets are available through the dispenser slot.

Built-in readers

  • 2D barcode scanner
    • 35cm reading distance
    • reading printed barcodes
    • read from phone screen too
  • RFID reader
    • 5cm reading distance
    • reading RFID chips embedded in tickets

With the help of the reader, you can perform the following operations:

  • scan barcode voucher
  • scan tickets already issued
  • season ticket extension

Remote access

  • Internal temperature measurement
  • Measurement of internal humidity
  • Measurement of current consumption
  • Monitoring of installed batteries
  • Remote shutdown and restart
  • Sending measurement data and status data to Zabbix monitoring

The operation of the automatic system is greatly facilitated by the integrated remote monitoring unit.

The status of the vending machine can be monitored by continuously checking the internal status and sending it to Zabbix.
Alarm events can be set.

The remote control unit can be used to disconnect the main internal units of the vending machine, allowing remote remote testing.

The remote control unit controls the operation of the built-in fans depending on the internal temperature and humidity.

Power supply protection and battery

  • Surge protector
  • Circuit breaker
  • Heat Release
  • Built-in gel batteries
  • All power supplies have short-circuit protected outputs

The built-in protections greatly increase the reliability, operational safety and lifetime of the device.

Ticket formats

Screenshots

Buy a ticket
Redeem Voucher

Technical data

MegnevezésAdat
Mechanikai és környezeti jellemzõk
Fizikai mérete1707x505x364 mm
Tömege~80kg
VédettségIP34-es védettségû
Mûködési hõmérséklet tartomány0°C - 40 °C között
Mûködési páratartalom5% - 95% között
Elektromos jellemzõk
TápfeszültségAC 230V 50Hz
Teljesítmény felvétele300W
Szigetelési osztályI. érintésvédelmi osztály
Informatikai jellemzõk
Monitor19" 4:3 aktív mátrixos TFT LCD LED háttérvilágítással, 1280x1024px felbontás, ~1000nit fényerõ, 14msec válaszidõ, PCAP 10 pontos érintõképernyõ, 6mm vastag vandálbiztos üveg,
Mûködtetõ operációs rendszerWindows 11
Kommunikációs interfészEthernet 100Base T kommunikációs port

Design information

Automatic installation

Installation space requirements

A floor area of 1.5 m x 1.5 m is required, taking into account the requirements for use and service.
The rear of the vending machine can be installed 15cm from the wall.
Access from the rear is not required.

The automat must be fixed to the concrete base through a 12mm hole.
Drilling template can be found in the Downloads section.

Outdoor placement

The vending machine should preferably be installed indoors, although it has IP34 protection, outdoor use is not recommended.
If it is not possible to operate it indoors, it must be placed under a rain-protected roof overhanging the vending machine by at least 1 m from the front and back and sides.
In addition to the rain protection, it must be protected from direct sunlight, in particular direct sunlight on the screen must be avoided.

Legal information

The EasyTicket vending machine is subject to registration under the relevant provisions, and a registration number must be requested from the NAV.

The registration number must be clearly displayed on the machine.

The notification form and instructions for filling it in are available at this link: form AVTOMATA.

Please note that changes in operation must also be reported!

List of legislation applicable to vending machines:

  • The 2017 Law on the Rules of Taxation.
    CL Act of 2017 (Art.)
  • The Tax Administration Ordinance 2017.
    CLI.
    (Air.)
  • The detailed rules of the tax administration procedure in accordance with Decree 65/2017.
    (XII. 28.)
    Government Decree No.
    Decree No.
  • The General Rules on eGovernment and Trust Services 2015.
    CCXXII.
    (e-Administration Act)
  • The tax liability of the operator of automatic equipment is subject to tax pursuant to Decree 8/2019.
    (27.VI.) (PM Decree)
  • Decree No 31/2016 on the technical requirements of vending machines for the sale of foodstuffs without operator, on the operation and servicing of vending machines and on the provision of data recorded in vending machines to the State Tax and Customs Administration.
    (IX. 2.)
    (NGM Decree)

Downloads

Icon
Fúrósablon
1 file(s) 0.00 KB